DEC: THE FINAL SOLUTION FOR WASTES AND ETEROGENEOUS MATERIALS
The densifier is a PATENT PROTECTED machine which finds its better applications not only in the mere plastic sector but also in wastes and combined materials.
Born as a densifier for agglomerating non rigid plastics, in order to reduce the proportion between weight and volume, and optimising in this way the stocking, the handling, and the transport, is gradually been modified till becoming the essential instrument to work on those different cases in which no other machine can help.
The two co-rotating screws with anti-wearing covering, the warmed and adjustable plate, the dosing and feeding system controlled by a patented valve, make the DEC the ideal machine not only for plasticising film or packaging, but above all for working on those plastics which would normally be considered a non-recyclable waste, due to their peculiar conditions.
In its warmed chamber it is in fact possible to work:
- Materials with a very high residual moisture, up to 35-40
- Compounds (wood-plastic, rubber-plastic, sawdust-plastic)
- Working wastes (car fluff, WEEE scraps plastics, pulper waste plastics).
- Products actually quite impossible to separate and sort (carpets, dusts, tank bottom wastes)
- Heterogeneous waste for producing RDF
With the growing difficulties in managing the low quality plastics, hardly separable, especially due to the CHINESE IMPORT BLOCK, thousands of tons of AGGREGATED PLASTIC WASTES and PACKAGING keep filling the warehouses, not only in Europe, but in all the other markets.
The decision taken by the Chinese government TO NOT ACCEPTING ANYMORE AGGREGATED PLASTIC WASTES, UNLESS AT LEAST PARTIALLY PROCESSED, has created a huge quantity of hardly separable material which, before today was simply divided from good one, pressed and sent to China.
ITALREC DEC REPRESENTS NOWADAYS THE ONLY SOLUTION FOR UNBLOCKING THIS SITUATION, ALLOWING THE TRANSFORMATION OF A POTENTIAL WASTE INTO A PRIMARY RAW MATERIAL.
It’s in fact the only machine able to transform all this material from a waste into a RESUSABLE RAW MATERIAL for different sectors, from the INCINERATION to the production of PLASTIC MIX for manufacturing a wide range of different accessories.
It’s the only densifier on the market actually not having any kind of limits for what concerning the ingoing products, and which can transform a waste into a new material which can be directly passed through an extruder. In event the extruder be directly installed in tandem after the DEC, this will act as a doser for the extruder itself, optimizing the production of NEW GRANULE.
Assembled in tandem with an extruder it allows the direct production of NEW GRANULE starting from a waste.
FROM WASTE TO GRANULE